Del IO Module

Del IO Module -Remote Monitoring and Control Solution

Gadgeon’s Del-IO module is used to instrument legacy equipment on a factory floor for remote monitoring and control. Del-IO Module is equipped with analog inputs, digital I/O and relay outputs and offers a variety of solutions for remote I/O and can be used for remote monitoring and control of factory equipment. It interfaces sensors and actuators to IoT platforms using Modbus, TCP/IP, or RTU protocols. With an easy-to-use and intuitive graphics utility system configurations can be done in an extremely short time.

Multiple industry solutions leverage Del IO module like Building management Systems, Automation and control, Real-Time Production Monitoring, Data acquisition, and other Industrial IoT implementations.

  • Microchip high performance SAM E54 micro-controller
  • 32-bit ARM® Cortex® -M4 processor running of 12 MHz
  • Memory: 256K RAM & 1 MB Flash
  • Serial 2KB EEPROM
  • Internal 256KB RAM and 1MB Flash
  • 2KB Serial EEPROM
  • Support PoE 802.3 af
  • Dual power source – PoE or 24V DC-Jack
  • SWD for programming
  • Intuitive web server for system configurations
  • Ethernet – 1 x 10/100 MBps, RJ45 Connector
  • Magnetic isolation – 2.25kV
  • RS-485 at 9600/115200/198000 baud
  • 8-channel 24V 1kV Isolated Digital Inputs
  • 4-channel 0-10V Analog Inputs with 1kV Isolation
  • 4 channel 24V 20mA Digital output
  • 4 channel Relay based output with 230 V 2A
  • Low power consumption~200mA
  • Surge Protection: Serial port 15kV ESD
  • Intuitive web server for system configurations
  • Support for Modbus TCP(Ethernet) or RTU(RS485)
  • Factory reset
  • Screw type terminal connections
  • Protocol stack: IPv4, DHCP client
  • Preloaded free RTOS, LwiP stack
  • Analog input
    • Channel: 4-Ch optically isolated
    • Type: Voltage (DC)
    • Range: 10 MΩ
    • Resolution: 12bit
    • Sampling rate: 1MSPS
    • Isolation voltage: 5000 Vrms
  • Digital Input
    • Channel: 8-Ch Optically isolated
    • Range: 0-24V
    • Logical high (min): 12V
    • Logical low (max): 5V
    • Min input current: 4mA
    • Isolation voltage: 2500 Vrms
  • Digital Output
    • Channel: 4-Ch
    • Range: OFF – 0V
    • Current: 20 mA
    • LED indication: Yes
  • Relay Output
    • Channel: 4-Ch>
    • Contact Rating: 230 VAC*110VDC**>
    • Current Rating: 2 A>
    • LED indication: Yes>
  • Mechanical: Length – 146 mm; Width – 79 mm; Height – 48 mm; Weight – 420gm
  • Operating temperature: 0 to 70o C
  • Storage temperature: -20 to 80o C

View Detailed Case Studies Download E-Brochure
Let’s Start your IoT Journey
Contact Us